Flat Gate Valve Parallel Slide valve
Introduction
Through conduit valves are widely used for oil and gas pipeline service. This type of valve has such function that, when fully opened, media passage capability superior to valves in use for general secondary process line, it can also be capable for pig ball Cleaning service. BVMC through conduit gate valves are available in Slab Gate and Expanding Gate design and both are fully comply with API 6D standard.
Slab Gate Valve
Slab gate valve is simple in design but efficient in performance. This design utilizes two spring loaded floating seats which are pressure energized, moving the upstream seat in contact with the gate that brings about a tight and complete seal with both the upstream and downstream.
Technical Specification
| Structural reference | GB | API | |
| Design standard | JB/T5298 GB/T19672 | API6D ASME B16.34 |
|
| Structural length | Flanged | GB/T 12221 GB/T19672. JB/T5298 |
API6D ASME B16.10 |
| Welded connection | GB/T12221 GB/T19672 | ||
| Flanged ends | GB/T9113 JB/T79 | ASME B16.5 MSS SP44 | |
| Butt-welding ends | GB/T 12224 | ASMEB16.25 | |
| Test & inspection | GB/T13927 JB/T9092 | API6D API598 | |
Note: The sizes of valve connecting flange can be designed according to customer's requirement.
Major Parts Material Form
|
No. |
Part name |
Material | ||||||
| Ordinary type | Anti-sulphur type | |||||||
| GB | ASTM | GB | ASTM | |||||
| 1 | Blow down stops | 25+Zn | A105+Zn | 12Cr18Ni9 | A276-304 | |||
| 2 | Grease injection joint | 25+Zn | A105+Zn | 25+Zn | A105+Zn | |||
| 3 | Body | WCB | A216-WCB | WCB | A216-WCB | |||
| 4 | Disc | 16Mn+ENP | A105+ENP | 12Cr18Ni9 | A276-304 | |||
| 5 | Seat | 16Mn+PTFE | A105+PTFE | 12Cr18Ni9+PTFE | A276-304+PTFE | |||
| 6 | O-ring | NBR | NBR | FPM | FPM | |||
| 7 | Stem | 2Cr13 | A276-420 | 12Cr18Ni9 | A276-304 | |||
| 8 | Packing seat | 2Cr13 | A276-420 | 2Cr13 | A276-420 | |||
| 9 | “Y” ring | NBR | NBR | FPM | FPM | |||
| 10 | Sealing shroud | 20Cr13 | A276-420 | 2Cr13 | A276-420 | |||
| 11 | Indicating stem | 12Cr18Ni9 | A276-304 | 12Cr18Ni9 | A276-304 | |||
| 12 | Gasket | Graphite+1Cr18N9 |
Graphite+304 |
Graphite+1Cr18N9 | Graphite+304 | |||
| 13 | Bonnet | WCB | A216-WCB | WCB | A216-WCB | |||
| 14 | Stud | 35CrMoA | A193-B7 | 35CrMoA | A193-B7 | |||
| 15 | Nut | 45 | A194-2H | 45 | A194-2H | |||
| 16 | Yoke | WCB | A216-WCB | WCB | A216-WCB | |||
Related products
-
High Temperature and High Pressure Electric Pow...
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...
-
Threaded/Welded Forged Steel Gate Valve
Products Design Features The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived. 3.The surface and the adjusting media of the valve shaft are nitrogenized so that it ...
-
Flanged Forged Steel Gate Valve
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...
-
Threaded/Welded Forged Steel Gate Valve
Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in o...
-
Bolted Bonnet OS&Y Gate Valve
Products Design Features Products design features • Stellited seating surface • Low emission control • Flexible wedge • Full guiding • Absolute bonnet joint leak proof • Optional by-pass design, Y Style Globe Valve, Check Valve. Products Range Size: 2”-24” Rating: ANSI 600lb-2500lb Body material: Carbon steel , Chromium Moly Alloy steel Trim: Per API 600 Operation: Handwheel, Gear, Motor actuator Flanged ends cast steel gate valve are used to ...
-
Low temperature Gate Valve
Products Design Features Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in oil industry chemical industry fossil-fired power plants. The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good perform...