Jacketed Ball Valve
Product Information
Type: JB
Design Specification: ASME B16.34, API 6D, BS5351
Nominal Diameter: DN50~DN400 (NPS2~NPS16)
Pressure Rating: PN 1.6~PN10MPa (Class150-Class600)
Product Description and Structure Features
CONVISTA’s Jacketed Ball Valve with the characteristics of small size, light weight and low fluid resistance, which are recommended to transport the highly solidified or highly viscous material.
The outside jacket provide an enough heating exchange room, besides, the flow channel between body and jacket are bigger than the general jacket channels design, which would prevent the medium clogging, and assure the heating efficiency as well as energy efficient utilization. CONVISTA’s Jacketed Ball Valve develops from mature floating ball valve and trunnion mounted ball valve technology, it has all the structure feature of floating ball valve and trunnion mounted ball valve.
Related products
-
Threaded/Welded Forged Steel Gate Valve
Products Design Features The main structure features include: 1.Both design and manufacture are carried out strictly following GB/T12234AP600and AP1602. The products feature a reasonable structure. reliable seal, good performance and nice modeling. 2.Co hard alloy welded sealing surface, which is wearing resistant erosion proof, abrasion proof and long-lived. 3.The surface and the adjusting media of the valve shaft are nitrogenized so that it ...
-
Pressure Sealed Swing Type Check Valve
Products Design Features Check valves are used in pipes under pressures betweenPN1.6-PN16.0MPa (Class 150~2500Lb)working temperatures-29-60C They are used in industries include oil,chemistry pharmaceutical fertilizer and power gene-ration to prevent the backward flux of the media. The main structure features include: 1. The products feature a reasonable structure reliable seal good performance and nice modeling. 2. Either soft or hard seal can...
-
Top Double Eccentric Semi – Ball Valve Se...
Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pre...
-
Trunnion Mounted Ball Valve
Performance Specification Pressure Testing pressure at constant temperature (MPa) Applicable temperature Applicable medium The shell testing High-pressure seal Low-pressure seal Nominal rating pressure(PN) 1.6 2.4 1.76 0.6 -29~121℃ or upon the user requirement Natural gas,liquefied gas,coal gas,oil,water, requirement 2.5 3.75 2.75 0.6 4.0 6.0 4.4 0.6 6.4 9.6 7.04 0.6 10.0 15.0 11.0 0.6 16.0 24.0 17.6 0.6 Pre...
-
Threaded/Welded Forged Steel Gate Valve
Products Design Features Stronger, Leakproof Body-bonnet Joint, Fully Encased Spiral Wound Gasket The design of the gasketed joint is critical. Its compression is better controlled in a fully enclosed cavity. Also, the possibility of unwinding of the SS spiral metal is eliminated. Flanged ends cast steel gate valve are used to cut or connect the pipe media under nominal pressure between PN1.6-42.0MPa(Cass150~2500)working temperatures ≤ 600in o...
-
Forged Steel Trunnion Mounted Fully Welded Ball...
Design Standard: API 6D Design Configurations: Full welding between body and bonnet, Full port or reduce port, Fire safe design, Double block & bleed, Cavity pressure relief, Anti-blowout stem & Anti-static devices, Optional double piston design, Optional underground extended stem design Size Range: 2"~48" Pressure Rating：ANSI 150lb~2500lb Body Material: Forged Carbon Steel Trim Material:A105+ENP,13Cr,F304,F316 Operation: Lever, Gear, Motor, Pneumatic, We in...